21
2
First Steps
Removing the Battery
Before removing the battery, turn the camera off.
Press sideways (c).
• The battery is partially ejected.
Remove the battery.
Alternative Power Sources
To power your camera continuously for extended playback, use the EH-61 AC
adapter supplied with your camera.
• To use the adapter, open the interface connector cover and
insert the DC plug of the adapter into the DC-IN connector
of the camera.
• When the AC adapter is connected to the camera for a long
period, the camera and the AC adapter may become hot,
but this is not a malfunction.
• Read and follow all warnings and instructions supplied by
the AC adapter manufacturer.
Only a Nikon-brand EH-61 AC adapter should be used to connect the cam-
era to an AC power source. Do not, under any circumstances, use other
makes of AC adapter. Failure to observe this precaution could result in over-
heating or in damage to the camera.
c
1
2
To Next Page
Loading...
