Nikon D1 Instructions For Use

Using the Radio In FlashWizard II Mode:
To activate FlashWizard II mode, you will need to do the follow steps -
1) Turn the camera off.
2) Press and hold the top camera trigger button
3) Turn the camera power switch back to the ON position while still holding in the trigger
4) Let go of the trigger button
You are now in FlashWizard II compatible mode.
When ever you turn on the camera, the mode will be determined by if the trigger is held or not.
IMPORTANT: If you change batteries or turn the unit off, you WILL need to follow the steps
above to keep Fl ashWizard II mode act ive. The mode is NOT saved in memory.
Once FlashWizard II mode is active, the unit will automatically have the Prerelease lock turned
on.
Since the camera does not have the same user interface (keypad) as a FlashWizard II, the radio
needs to work by way of a “Learn” mode.
It learns what it needs for configuration from another FlashWizard II radio.
FlashWizard II Mode Configuration:
Follow the procedure below to set up your D1 camera as a FlashWi zard II.
1) Turn on a FlashWizard II radio and set that radio (external radio) with all the settings you want
the internal D1 camera radio to have. Set the System number, Unit number and Location.
2) Turn the camera on in FlashWizard II mode.
3) Press and hold the “Flash” button on the camera.
4) On the FlashWizard II keypad, press SHIFT-SLEEP (SHIFT-3).
5) Press 1 for “Wake Up”
6) Press 3 for “Remote”
7) Type in the Unit number you want the Camera to become (Learn).
8) Press “ENTER”
When the camera sees the “wake up” command, it will query the sending FlashWizard II for it’s
full information including the location.
The Camera radio uses a fixed 110.0ms “Equalize to time”. This means that if you are going to
use the D1 cameras for use with the FlashWizard II system, you will need to set your Equalize
time on all FlashWizard II units to be 110.0ms.

Nikon D1 Specifications

Radio Specifications

radio channels PocketWizard	32 channels (344 - 354MHz)
radio channels FlashWizard	64 System ID’s ( all on 360.0MHz )
line of sight range	1, 000 feet (300 meters)

Power and Sensitivity

transmit power	-5dBm typical
receiver sensitivity	-93dBm for 12dB S/N ratio (typical)
batteries	Uses the camera’s rechargeable battery

Weight and Dimensions

size	2.25" x 0.8" x 0.12"
weight	0.16 oz.
antenna length	< 3 inches