Nikon D100 Quick Reference Guide
Settings for regular point-and-shoot photography
1. Hold both the BKT and buttons for 2 seconds to restore camera default settings:
Image quality: JPEG Normal
Image size: Large 3008 x 2000 pixels
Sensitivity: ASA/ISO 200
White Balance: Auto
Single Area Auto-Focus
Center focus area
2. Set focus mode to S
3. Set function dial to P
(camera front)
(camera top)
4. Focus on the subject by pressing the shutter-release button halfway.
A steady green light in the viewfinder indicates that the subject is in focus.
Take the photo by pressing the shutter-release the rest of the way down.
If the green light in the viewfinder is blinking, the camera is unable to focus
on the subject using autofocus. Switch to manual focus mode.
To Next Page
Loading...
