Nikon D3300 - Page 12

X
~Observe
proper
precautions
when
handling
batteries
Batteries
may
leak
or explode
if
improperly
handled.
Observe
the
following
precautions when handling
batteries for
use
in
this product:
•
Use
only batteries approved for
use
in
this equipment.
•
Do
not short
or
disassemble
the
battery.
•
Be
sure
the product
is
off
before
replacing the battery.
If
you
are
using
an
AC
adapter,
be
sure
it
is
unplugged.
•
Do
not attempt to insert the battery
upside
down
or
backwards.
•
Do
not
expose
the battery to flame
or to
excessive
heat.
•
Do
not
immerse
in
or
expose
to
water.
•
Replace
the terminal
cover
when
transporting the battery.
Do
not
transport or
store
the battery with
metal
objects
such
as
necklaces
or
hairpins.
•
Batteries
are
prone
to
leakage
when
fully
discharged.
To
avoid
damage
to the product,
be
sure
to
remove
the battery
when
no
charge
remains.
•
When
the battery
is
not
in
use,
attach the terminal
cover
and
store
in
a
cool,
dry
place.
•
The
battery
may
be
hot
immediately after
use
or
when the
product
has
been
used
on
battery
power for
an
extended
period.
Before
removing the battery turn
the
camera
off
and
allow
the battery
to
cool.
• Discontinue
use
immediately
should
you
notice
any
changes
in
the battery,
such
as
discoloration
or
deformation.
~Observe
proper
precautions
when
handling
the
charger
•
Keep
dry.
Failure
to
observe
this
precaution could
result
in
injury or
product malfunction
due
to fire or
electric
shock
.
•
Do
not short the
charger
terminals.
Failure
to
observe
this precaution
could
result
in
overheating
and
damage
to the
charger.
•
Dust
on
or
near
the metal
parts
of
the plug should
be
removed
with a
dry cloth.
Continued
use
could
result
in
fire.
•
Do
not
go
near
the
charger
during
thunderstorms.
Failure
to
observe
this precaution
could
result
in
electric
shock
.
•
Do
not handle the plug or
charger
with wet
hands.
Failure
to
observe
this precaution
could
result
in
injury
or product malfunction
due
to fire
or
electric
shock.
•
Do
not
use
with travel
converters
or
adapters
designed
to convert from
one
voltage to another
or
with
DC
-
to-AC
inverters.
Failure
to
observe
this precaution could
damage
the
product
or
cause
overheating or fire.