224 B The Setup Menu: Camera Setup
This option is displayed only when an Eye-Fi memory card
(available separately from third-party suppliers) is inserted in the
camera.
Choose Enable to upload photographs to a preselected
destination.
Note that pictures will not be uploaded if signal
strength is insufficient.
Before uploading pictures via Eye-Fi,
select Disable for Airplane mode (0 222) and Bluetooth >
Network connection (0 223).
Observe all local laws concerning wireless devices and choose
Disable where wireless devices are prohibited.
Eye-Fi Upload
G button ➜ B setup menu
D Eye-Fi Cards
Eye-Fi cards may emit wireless signals when Disable is selected.
A g icon displayed when Disable is selected indicates that the camera
is unable to control the Eye-Fi card (0 291); turn the camera off and
remove the card.
Select longer values for Auto off timers > Standby timer in the setup
menu when using an Eye-Fi card.
See the manual provided with the Eye-Fi card, and direct any inquiries
to the manufacturer.
The camera can be used to turn Eye-Fi cards on
and off, but may not support other Eye-Fi functions.
D Airplane Mode (0 222)
Enabling airplane mode disables Eye-Fi upload.
To resume Eye-Fi
upload, select Disable for Airplane mode before selecting Enable for
Eye-Fi upload.
To Next Page
Loading...
