29
Auto AF Fine-Tuning
6
Perform auto AF ne-tuning.
Press the AF-mode and movie-
record buttons simultaneously
and keep them pressed until
the dialog shown in Step 7 is
displayed (this should take
slightly over two seconds).
AF-mode button
Movie-record button
7
Save the new value.
Highlight Yes and press J to
add the AF ne-tuning value
for the current lens to the saved
values list (CPU lenses only).
Note that only one value can be
stored for each type of lens.
8
Enable AF ne-tuning.
In the camera setup menu,
select AF ne-tune > AF ne-
tune (On/O), then highlight
On and press J.
To Next Page
Loading...
