143P, S, A, and M Modes
4 Select Ye s .
The menu shown at right will be
displayed; highlight Ye s and press J.
The camera will enter preset
measurement mode.
When the camera is ready to measure
white balance, a flashing D (L) will
appear in the viewfinder and
information display.
5 Measure white balance.
Before the indicators stop flashing,
frame the reference object so that it
fills the viewfinder and press the
shutter-release button all the way down.
No photograph will
be recorded; white balance can be measured accurately even
when the camera is not in focus.
To Next Page
Loading...
