150 P, S, A, and M Modes
4 Frame a photograph, focus, and
shoot.
AE bracketing: The camera will vary
exposure with each shot.
The first
shot will be taken at the value currently selected for exposure
compensation.
The bracketing increment will be subtracted
from the current value in the second shot and added in the
third shot, “bracketing” the current value.
The modified
values are reflected in the values shown for shutter speed and
aperture.
WB bracketing: Each shot is processed to create three copies,
one at the current white balance setting, one with increased
amber, and one with increased blue.
ADL bracketing: The first shot after bracketing is activated is
taken with Active D-Lighting off, the second at the current
Active D-Lighting setting (0 133; if Active D-Lighting is off,
the second shot will be taken with Active D-Lighting set to
Auto).
In continuous high-speed and continuous low-speed release
modes, shooting will pause after each bracketing cycle.
If the
camera is turned off before all shots in the bracketing sequence
have been taken, bracketing will resume from the next shot in
the sequence when the camera is turned on.
To Next Page
Loading...
