Nikon DTM-302 Series User Manual

4 Applications
88 Total Station DTM-302 Series Instruction Manual
Measuring between the current and the first point measured
1.
To enter the RDM (Radial) function, press [3]
or select
RDM(Radial) in the Programs
menu.
2. Sight the first point and press [MSR1] or [MSR2].
The distance from the station point to the first
point is displayed.
3. Sight the second point and press [MSR1] or
[MSR2]. The distances between the first and
second point are displayed.
rSD Slope distance between two points
rVD Vertical distance between two points
rHD Horizontal distance between two points
4. To change display screens, press [DSP].
rAZ Azimuth from first point to second point
rV% Percentage of grade (rVD/rHD) × 100%
rGD Vertical grade (rHD/rVD): 1
5.
To record the distance and angle information
as a comment record, press
[ENT] in the 1/2 or
2/2 observation screen.
Default point numbers are displayed. You can
change these point numbers. To record a note,
press
[ENT] in the To field.

Nikon DTM-302 Series Specifications

General

Brand	Nikon
Model	DTM-302 Series
Category	Camera Accessories
Language	English