FAA41051-R.3644.A
- Ｍ3 ･ Ｆ６ -
Shutter speeds • In P, A: 30 to 1/8000 sec.
• In S: 30 to 1/8000 sec. (in 1/3 steps), X (1/250 sec.)
• In M: 30 to 1/8000 sec. (in 1/3 steps), Bulb, X (1/250 sec.)
* Shutter speed can be prolonged to 30 min. in M mode
Sync contact X-contact only; flash synchronization up to 1/250 sec. (up to
1/8000 sec. possible in Auto FP High-Speed Sync)
Flash control TTL flash control by combined five-segment TTL multi
sensor with single-component IC and 1,005-pixel AE sensor
• i-TTL Balanced Fill-Flash with SB-800, 600
• Automatic Balanced Fill-Flash with TTL Multi Sensor: 3D
Multi-Sensor Balanced Fill-Flash compatible with SB-800,
SB-600, SB-80DX, SB-50DX, SB-28/28DX, SB-27, SB-26,
SB-25 and D/G-type Nikkor lens; Multi-Sensor Balanced Fill-
Flash with a Speedlight without Monitor Pre-Flash and CPU
lens other than D/G-type or non-CPU lens
• Standard TTL: With Spot Metering
• Film speed range in TTL auto flash: ISO 25-1000
Flash sync mode Front-Curtain Sync (normal sync), Red-Eye Reduction, Red-Eye
Reduction with Slow Sync, Slow Sync, Rear-Curtain Sync
Ready-light Lights up when flash fully charged with Speedlights SB-800,
SB-600, SB-80DX, SB-50DX, SB-30, SB-29s/29, SB-28/28DX, SB-27,
SB-26, SB-23, etc.; blinks (3 sec. after flash) for full
output warning
Accessory shoe ISO518 hot-shoe contact digital data communication (sync
contact, ready-light contact, TTL auto flash contact, monitor
contact, GND), safety lock provided
Sync terminal ISO519 terminal, lock screw provided
Creative Lighting Advanced Wireless Lighting, Auto FP High-Speed Sync,
System Modeling flash, FV Lock and AF-Assist for Multi-Area AF
available with Speedlights SB-800, SB-600
Self-timer Electronically controlled; timer duration: 10 sec.
Depth-of-field Stop-down lens aperture by pressing depth-of-field button
preview button
Mirror up Possible via film advance mode selector
Film loading Film automatically advances to first frame when camera back
is closed
To Next Page
Loading...
Need help?
General
