• When the lens is not set to its minimum aperture setting (largest f-
number) and the power switch is turned on, FEE blinks in the LCD panel
and viewfinder and the shutter cannot be released.
Checkpoints
Use a D-type AF Nikkor lens to utilise all of this camera's functions.
(See page 34 for Lens Compatibility.)
Make sure to turn the power switch off when attaching/detaching the
lens.
When attaching the lens, take care not to press the lens release button.
Avoid direct sunlight when attaching/detaching the lens.
2.3 Detaching the lens.
• Push and hold the lens release button, then turn the lens clockwise.
When camera is left unattended without lens
When you leave the camera unattended
without a lens attached, be sure to attach
the supplied body cap (page 3), or
optional body cap BF-1A. (BF-1 body cap
cannot be used.)
3 Turn the power switch on and
load DX-coded film. With DX-
coded film, film speed will be set
automatically (ISO 25-5000).
To Next Page
Loading...
