• If the end of the film roll is reached during Bracketing, the remaining shots
can be taken after new film has been loaded. Also, if you turn the power
switch off during Bracketing, the remaining shots can be taken after the
power is turned back on.
• Bracketing is performed with one frame at a time when the self-timer (page
68) is set.
Multiple Exposure
Multiple exposure consists of two or more exposures of one or more
subjects in the same frame. Multiple exposure can be performed in any
of the available exposure modes.
Standard compensation value in Multiple exposure
Exposure compensation is
necessary depending on the
number of exposures in
Multiple exposure since
more than one image is
exposed in the same frame.
Number of
exposures
Compensation
value
Two
-1.0 EV
Three
-1.5 EV
To Next Page
Loading...
