self-timer indicator LED will blink for 8 sec. and then illuminate for 2 sec.
before the shutter is released.
CUSTOM SETTING
Using the Custom Setting feature, you can
create a combination of functions that is
different from the initial factory settings. The
functions listed in this section can be
selected with the F80/F80D/F80S.
Menu/Features of Custom Setting
• Creating Custom Setting
1 Set the exposure mode/Custom Setting select dial to
CSM and select a menu number by rotating the Main-
Command Dial.
• 19 menus (1 to 19) are available with the F80S and 18 menus (1 to 18) are
available with the F80/F80D.
2 Select the desired option number by rotating the Sub-
Command Dial.
• When the desired option number is displayed in the LCD panel, CUSTOM
appears in the LCD panel. Rotate the exposure mode/Custom Setting
select dial to set desired exposure mode and picture can be taken with
desired settings.
• The shutter cannot be released when the exposure mode/Custom Setting
select dial is set to CSM. Set the dial to the desired exposure mode before
shooting.
• Cancelling Custom Setting
Set the exposure mode/Custom Setting select dial to
CSM and perform Two-Button Reset (page 76).
• All the Custom Settings are cancelled and reset to their initial factory settings.
• Each Custom Setting can be cancelled and reset to initial setting by selecting
the number of "initial setting" (e.g. 0 with Custom Setting menu number 1) at
step 2 above.
Menu number and Custom Setting options
To Next Page
Loading...
