•Ready-light
• If the ready-light blinks approx. 3 sec. after full flash output, underexposure
may have occurred (when the Speedlight is set to TTL or non-TTL Auto Flash
mode). Check the focus distance, aperture or flash shooting distance range
and shoot again.
Flash Sync Mode Features
Set the flash sync mode to Front-Curtain
Sync for normal flash photography. The
camera's shutter speed is automatically set
to 1/60 to 1/125 sec. for flash photography
in Programmed Auto or Aperture-Priority
Auto exposure mode.(With an optional
Speedlight SB-26, SB-25 and SB-24, set
the Speedlight's sync mode selector to
NORMAL.)
Normally, the camera's shutter speed is
automatically set to 1/60 to 1/125 sec. for
flash photography in Programmed Auto or
Aperture-Priority Auto exposure mode.
To Next Page
Loading...
