Connecting the GP-1 to a Computer
The GP-1 can supply GPS data to a computer for use with mapping software and other applications.
Connect the
UC-E4 USB cable supplied with your digital camera to the GP-1 USB terminal (햳) and connect the cable to the
computer.
Power is supplied from the computer.
Drivers for Windows XP and Windows Vista are available from the
following Nikon websites, together with other information on using the GP-1 with a computer:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
If the GP-1 is connected simultaneously to both a camera and a computer, GPS data will be supplied to the com-
puter only.
To Next Page
Loading...