Advanced Operations24
To automatically fire the flash
Auto Flash mode
The flash automatically fires when the subject is dark.
1.
Press the Power button.
When you press the Power button, the “ ” mark appears
on the LCD panel and Auto Flash mode is automatically
selected.
2.
Make sure that the green LED lights up,
then release the shutter.
When the green LED is blinking with the Shutter Release button
pressed lightly, the flash is being charged, and the shutter cannot
be released. Take your finger off the Shutter Release button once
and lightly press it again. If the green LED is steadily lit release
the shutter.
If the subject is sufficiently illuminated, the flash does not fire.
Example
To Next Page
Loading...
