Nikon SB-5000 Reference Manual

H-7
H
Tips on Speedlight Care and Reference Information
En-01
Tips on Speedlight Care
Cleaning
• Dirt on the flash panel can cause it to break when the flash is fired. Clean
the flash panel regularly.
• Use a blower to remove dust and lint, then wipe gently with a soft, dry
cloth. After using the SB-5000 at the beach or seaside, wipe off sand or
salt with a cloth lightly dampened in distilled water and then dry the
product thoroughly by wiping it gently with a dry cloth.
• On rare occasions, the LCD may turn on or go dark, due to static
electricity. This is not a malfunction. The display will soon return to
normal.
• The SB-5000 contains a large amount of precision electronics. Do not
subject it to shock or vibration. Do not apply strong pressure to the LCD
panel.
• Never use thinner, benzene or other organic solvents when cleaning the
Speedlight, as this may damage the Speedlight or cause it to catch fire.
Using these agents may also impair your health.

Nikon SB-5000 Specifications

General

Type	-
Product color	Black
Flash coverage	24 - 200 mm
Flash guide number	55 m
Wireless connection	Yes
Approximate recycling time	2.6 s
Brand specific flash systems	i-TTL (Nikon)
Battery type	AA
Number of batteries supported	4

Weight and Dimensions

Depth	137 mm
Width	73 mm
Height	103.5 mm
Weight	420 g