Safety Precautions
vi
Heat caution label
Caution: Heat of the empty cube
Immediately after diascopic observation using an epi-fluorescence attachment, the front face
of the empty cube may become hot, resulting in burns. Do not touch the front face of the
empty cube. Replace the empty cube several minutes after finishing the diascopic
observation.
Label Position
Empty cube of the epi fluorescence attachment
Light leakage
caution label
Caution: Light leakage
Do not use the epi-fluorescence attachment when the filter cube replacement cover is open.
Harmful light including ultraviolet light may leak and affect fluorescence observation.
Label Position
PHOT
2
1
P2-EFLM Motorized Epi Fluorescence P2-EFLI Epi Fluorescence
Attachment Attachment
Fall caution label
Caution: P2-FMDN Focus Mount attachment orientation
Attach the P2-FMDN Focus Mount to the stand so that the focus mount faces the front of the
stand as shown in the figure.
If the focus mount is attached in the incorrect orientation, the stand may fall over. This may
result in damage to the device or unexpected injury.
Label Position
P-PS32 Plain Stand, P-DSL32 LED Diascopic Illumination Stand,
P-DSF32 Fiber Diascopic Illumination Stand
Heat caution label
Light leakage
caution label
Light leakage
caution label
Fall caution label
To Next Page
Loading...
