9
I
Screw hole for mounting an
arm for halogen illuminator
Screw holes are located on
both sides of the arm. Holds
the G-EIA flexible arm or
Epi-arm.
Eyepiece inclination
SMZ645: 45° from the
horizontal
SMZ660: 60° from the
horizontal
Screw hole for mounting
6V-10W halogen illuminator
Holds the G-LS 6V-10W
halogen illuminator.
Hexagonal wrench
hanger
Holds the supplied
hexagonal
wrenches.
Zooming knob clicks ON/OFF screw
(inside)
Refer to “ON/OFF of the
Zooming Knob Clicks” on p.14
Hexagonal wrench
(Large)
Pillar
Supplied with the
focusing stand for
changing the
height of the arm.
Ground jack
Refer to “Antistatic
Feature” on p.25.
Hexagonal wrench
(Small)
Supplied with the
zooming body for
switching on and
off the zooming
knob clicks.
To Next Page
Loading...
