VAA35001-R.3666.A
- A16 ･ S1 -
1. Equipment
IBM compatible PC/AT ・ AC adapter EH-63 ・ USB cable ( UC-E10) ・ Cradle (COOL-STATION MV11)
2. Servicing tools
・ Pattern box ・ Color meter ・ Luminance meter ・ Calibration software (J65078)
・Adjustment collimator (J63090)
3. Adjustment / Order
Adjustment after replacing the CP-1 PCB of RP
1. Writing of the initial image data
2. Firmware up
3. Lens adjustment
4. AWB adjustment
5. CCD white dot defect compensation
6. CCD black dot/white dot defect adjustment
7. USB storage information registration
Note) When the lens unit is replaced, readjustments must be made regarding of the above 3 ~ 7.
Make the adjustments in the order from 3 to 7.
ADJUSTMENT
To Next Page
Loading...
