Nikon VAA35001 Coolpix S1 - Installing Usb Driver

VAA35001-R.3666.A
- A19 ･ S1 -
5. Setup
1) System requirements
・ Windows
®
98 or Me, 2000, XP
・ IBM-compatible PC/AT with Pentium or higher processor
・ CD-ROM drive
・ 3.5-inch 2HD diskette drive
・ USB port
・ 40 MB or more RAM
・ Hard disk drive with 15 MB or more memory space
・ VGA or SVGA monitor with 256 or more color display
2) Installing calibration software
・ Insert the calibration software installation diskette into the diskette drive.
・ Open Explorer.
・ Copy "DscCalDi.exe, Camapi32.dll" folder of the oppy disk drive in any folder on the hard disk.
6. Installing USB driver
If the USB driver is necessary, install Nikon View via CD-ROM packed with the camera.