VAA35001-R.3666.A
- A26 ・ S1 -
15. USB storage information registration
USB storage data is important when the camera is connected to a computer via a USB connection.
If there are any errors in the USB storage data, or if it has not been registered, the USB specications will not be
satised, so always check and register the USB storage data.
[How to adjust]
1. Connect the camera to a computer.
2. Double-click on the "DscCa1Di.exe".
3. Click on the "Get" button in the USB storage window and check the USB storage data.
VID: NIKON
PID: NIKON DSC S1
Serial:
Rev. : 1.00
4. Check the "Serial" in the above USB storage data. If the displayed value is different from the serial number of the
bottom of the camera, enter the number of the bottom of the camera, and click the "Set" button.
5. Check VID and Rev. entries in the USB storage data. If any of them are different from the values in 3. above, enter
the details of 3. and click the "Set" button.