VAA35001-R.3666.A
- R1･ S1 -
Item Criteria Tools
External view
Gap/Difference in
height
Outside and inside
status
・ General components
Gap: 0.3mm or less
Difference in steps (height): 0.15mm or less
※ The 0.2mm convex section on the strap is excluded.
・ When the battery case is opened/closed:
Gap in its periphery: 0.15mm or less
Gap in the bottom: 0.2mm or less
Difference between right and left:
0.08mm or less (periphery)
0.15mm or less (Difference in steps)
Difference in steps (height): 0.3mm or less
・ No noticeable damage, stain, sink mark, welded mark, uneven-
ness, crack or oil exudation.
・ No noticeable noise, when pushing the main body.
(Make a visual check under fluorescent lamp and natural
sunshine.)
Visual check
Visual check
Operationality
Operation/Shaking/
Shock
Buttons/PWS
Mode slide SW
・ Neither irregular operations nor abnormal noise.
・ No malfunction.
(For operation check, shake the camera in operation.)
(Tap the camera with an open hand, and press it onto the
Linoleum-laid desk.)
・ No button stuck down.
・ Proper clicking feeling on each button.
・ "Click" sound is made on or after turning on the switch.
(Make a operation check in normal operation.)
(For operation check, press buttons one-sidedly/lightly, push them
down, and press continuously with chattering sound.)
・ Clear clicking feeling and smooth touching. Neither outstanding
"caught/rubbed-in-mechanism" touch nor gap .
(Make a operation check in normal operation.)
Secondary battery
INSPECTION STANDARDS
To Next Page
Loading...
