Nikon VQA091AA - Using Self-Collage

44
Shooting Features
Smart Portrait Mode (Enhancing Human Faces When Shooting)
Using Self-Collage
The camera can capture a series of four or nine images
at intervals and save them as a one-frame image (a
collage image).
1 Press the multi selector J to select n
Self-Collage, and press the k button.
• A confirmation dialog is displayed.
• When you press the d button and select Self-
Collage before pressing J, you can configure the
settings for Number of shots, Interval, and
Shutter sound (A115).
• If you want to apply glamour retouch when
shooting, set the effect before selecting self-
collage (A41).
2 Take a picture.
• When you press the shutter-release button, a
countdown starts (about five seconds) and the
shutter is automatically released.
• The camera automatically releases the shutter for
the remaining pictures. A countdown starts about
three seconds before shooting.
• The number of shots is indicated by U on the
screen. It is displayed in yellow during shooting and it changes to white after
shooting.
3 On the screen displayed when the camera finishes taking the
number of shots that is set in Number of shots, select Yes and
press the k button.
• The collage image is saved.
• Each captured image is saved as an individual image separate from the collage
image. The images are grouped as a sequence, and a one-frame collage image is
used as the key picture (A67).
• When No is selected, the collage image is not saved.
Self-Collage
2