Nikon VQA091AA - Functions that Cannot be Used Simultaneously When Shooting

61
Shooting Features
Functions That Cannot Be Used Simultaneously When Shooting
Some functions cannot be used with other menu settings.
Functions That Cannot Be Used Simultaneously
When Shooting
Restricted
function
Setting Description
Flash mode
Continuous (A 108)
When a setting other than Single is selected,
the flash cannot be used.
Blink proof (A116)
When Blink proof is set to On, the flash
cannot be used.
Self-timer
AF area mode
(A111)
When Subject tracking is selected, the self-
timer cannot be used.
Macro mode
AF area mode
(A111)
When Subject tracking is selected, macro
mode cannot be used.
Image mode Continuous (A108)
Image mode is set as follows depending on
the continuous shooting setting:
• Pre-shooting cache: q (image size: 1600
× 1200 pixels)
• Continuous H: 120 fps: O (image size:
640 × 480 pixels)
• Continuous H: 60 fps: M (image size:
1280 × 960 pixels)
White balance
Hue (using the
creative slider)
(A25)
When hue is adjusted using the creative slider,
White balance in the shooting menu cannot
be set. To set White balance, select g in the
creative slider setting screen to reset the
brightness, vividness, hue, and Active
D-Lighting.
Continuous
Shooting
Self-timer (A49)
• If the shutter-release button is released
after the self-timer countdown starts, the
camera does not shoot continuously even
when Continuous H or Continuous L is
selected.
• The camera does not shoot continuously
even when Pre-shooting cache is
selected.
ISO sensitivity Continuous (A108)
When Pr
e-shooting cache, C
ontinuous H:
120 fps, or Continuous H: 60 fps is selected,
ISO sensitivity is fixed at Auto.