Nikon VQA091AA - Saving a Frame from a Movie as a Still Image

85
Movies
Editing Movies
5 Use HI to select m (save) and press
the k button.
• Follow the instructions on the screen to save the
movie.
B Notes About Movie Extracting
• A movie that was created by editing cannot be edited again.
• The actual trimmed portion of a movie may differ slightly from the portion selected using
the start and end points.
• Movies cannot be trimmed so that they are less than two seconds long.
Saving a Frame from a Movie as a Still Image
The desired frame of a recorded movie can be extracted and saved as a still image.
• Pause a movie and display the frame to be extracted
(A83).
• Use the multi selector JK to select the H control
and press the k button.
• Select Yes when a confirmation dialog is displayed,
and press the k button to save the image.
• The image quality of the still images to be saved is
normal (compression ratio of approximately 1:8).
The image size is determined by the original movie
image size (A117).
B Restrictions on Extracting Still Images
Still images cannot be extracted from a movie recorded with Z 1080/60i, U 1080/
50i, g 480/30p, W 480/25p, or an HS movie option.
Save
3 0 s
30s
1 m3 0 s
1m30s
Yes
No
Copy this frame as a still image?