166 More About Playback
To zoom in during full-frame playback, tap X or press J.
While zoom is in effect, you can:
• Zoom in or out/view other areas of the image: Tap X or use stretch
gestures to zoom in to a maximum of approximately 21× for
large images, 16× for medium images, and 10× for small
images created with DX (24×16) selected for image area. Tap
W or use pinch gestures to zoom out. While the photo is
zoomed in, use the multi selector or slide a finger over the
screen to view areas not currently visible in the display. Keep
the multi selector pressed to scroll rapidly to other areas of the
frame. A navigation window is displayed for a few seconds
after the zoom ratio is altered; the area currently visible in the
display is indicated by a yellow border. The bar under the
navigation window shows the zoom ratio, turning green at
1:1.
• Select faces: Faces detected during zoom are indicated by white
borders in the navigation window. Rotate the sub-command
dial or tap the on-screen guide to view other faces.
Taking a Closer Look: Playback Zoom
Navigation window
On-screen guide
To Next Page
Loading...
