8
*)
Optional accessories / Option depending on model
Original instruction
acids, alkalis, etc.)
• flammable, explosive dust (e.g. magnesium or aluminium dust,
etc.)
For standard machines (without type designation LC) following further
applies: The following materials must not be picked up by the machine:
• Hazardous dust.
1.8 Maintenance
Always keep the cleaner in a dry place. The cleaner is designed for continuous heavy work. Depend-
ing on the number of running hours – the dust filters should be renewed.
Keep the container clean with a dry cloth, and a small amount of spray polish.
For Dust Class L machines (with type designation LC) following applies:
During maintenance and cleaning, handle the machine in such a manner that there is no danger for
maintenance staff or other persons.
In the maintenance area
• Use filtered compulsory ventilation
• Wear protective clothing
• Clean the maintenance area so that no harmful substances get into the surroundings.
1.9 Regular servicing and inspection
Regular servicing and inspection of your machine must be carried out by suitably qualified personnel
in accordance with relevant legislation and regulations. In particular, electrical tests for earth continui-
ty, insulation resistance, and condition of the flexible cord should be checked frequently.
In the event of any defect, the machine MUST be withdrawn from service, completely checked and
repaired by an authorized service technician.
At least once a year, a Nilfisk technician or an instructed person must perform a technical inspection
including filters, air tightness and control mechanisms.
For Dust Class L machines (with type designation -0L, -2L) following applies:
During maintenance and cleaning, handle the machine in such a manner that there is no danger for
maintenance staff or other persons.
In the maintenance area
• Use filtered compulsory ventilation
• Wear protective clothing
• Clean the maintenance area so that no harmful substances get into the surroundings.
During maintenance and repair work all contaminated parts that could not be cleaned satisfactorily
must be:
• Packed in well sealed bags
• Disposed of in a manner that complies with valid regulations for such waste removal.
For details of after sales service contact your dealer or Nilfisk service representative responsible for
your country. See reverse of this document.
2.0 Warranty
Our general conditions of business are applicable with regard to the guarantee.
Unauthorised modifications to the appliance, the use of incorrect brushes in addition to using the ap-
pliance in a way other than for the intended purpose exempt the manufacturer from any liability for
the resulting damage.
Equipment marked with the crossed-out wheeled bin symbol indicates that used electrical
and electronic equipment should not be discarded together with unseparated household
waste. To avoid negative effects on human health and the environment the equipment must
be collected separately at the designated collection points.
Users of electrical and electronic household equipment must use the municipal collection schemes.
Please note that commercially used electrical and electronic equipment, shall not be disposed of via
municipal collection schemes. We will be pleased to inform you about suitable disposal options.
To Next Page
Loading...
Need help?
General
