Nilfisk-ALTO NEPTUNE 3 User Manual

8
1)
Options / model variants
Original instructions
NEPTUNE 3
3.6 Fill up tank for Alto
AntiStone
1. Fill up Alto Anti-Stone/water
softener reservoir with the
sample bottle provided. Alto
Anti-Stone prevents any
deposits of scale and acts
at the same time as a corro-
sion inhibitor.
For compatibility reasons, use
only the tested „Alto Anti-Stone“.
Order the refill pack in good time
(Order no. 8466, 6 x 1 l).
3.5 Fill up detergent tank
1)
1. Fill up detergent tank with
prediluted detergent.
Capacity see chapter 9.3 Tech-
nical Data
3.3 Install Crank handle
for high pressure hose
reel
1)
1. Pull cap of crank in arrow
direction.
2. Align tabs on crank with slot
in axle.
3. Put crank on axle of high
pressure hose reel.
4. Fix crank by pushing the
cap.
3.4 Fit clamp for high-
pressure jet tube
1. Insert clamp into the holder
on the sliding guard:
High-pressure
jet lance
1)
clamp
1.
2.
ø
Ø
STOP

Nilfisk-ALTO NEPTUNE 3 Specifications

General

Brand	Nilfisk-ALTO
Model	NEPTUNE 3
Category	Pressure Washer
Language	English