Nilfisk-ALTO SCRUBTEC R 466 Service Manual

General Information
19
Service Manual – SCRUBTEC R466 ... FOCUS II Micro Rider
Maintenance
The lifespan of the machine and its maximum operating safety are ensured by correct and regular mainte-
nance.
Warning! Read carefully the instructions in the Safety chapter before performing any
maintenance procedure.
The following tables provides the scheduled maintenance. The intervals shown may vary according to particu-
lar working conditions, which are to be dened by the person in charge of the maintenance.
For instructions on maintenance procedures, see the following paragraphs.
Scheduled Maintenance Table
Procedure
Daily, after using
the machine
Weekly
Every six
months
Yearly
Battery charging
Squeegee cleaning
Brush/cylindrical brush cleaning
Tank, debris collection grid and vacuum grid with oat
cleaning, and cover gasket check
Chemical Mixing System system cleaning and draining
(optional)
Squeegee blade check and replacement
Side skirt check (only for R 471C)
Solution lter cleaning
Vacuum system motor lter cleaning
Battery (WET) uid level check
Screw and nut tightening check (1)
Check and adjustment of driving belts between motors
and cylindrical brushes (only for R 471C)
Electromagnetic brake efciency check
Brush/pad-holder motor carbon brush check or
replacement
Vacuum system motor carbon brush check or
replacement
Drive system motor carbon brush check or replacement
(1) And after the rst 8 working hours.

Nilfisk-ALTO SCRUBTEC R 466 Specifications

General

Brand	Nilfisk-ALTO
Model	SCRUBTEC R 466
Category	Scrubber
Language	English