Need help?Do you have a question about the NIMO ECO Dryer 2.0 HP FT 60 VP and is the answer not in the manual?
Instructions for accessing and starting the dehumidifier unit disassembly from the rear.
Instructions for accessing and starting the dehumidifier unit disassembly from the front.
Overview of the dryer's control panel, including button functions and display.
Details on choosing between NORMAL DRY and EXTRA DRY programmes for different garment types.
Step-by-step guide on how to initiate a drying cycle, including status indicators.
Procedure for discontinuing an active drying cycle using the START/STOP button.
Explanation of the system's response when the dryer door is opened during operation.
Overview of optimizing drying cabinet programmes by adjusting parameter values for best results.
Detailed steps for adjusting parameter values on the control panel to fine-tune drying settings.
Instructions on how to revert the drying cabinet's parameters back to their original factory defaults.
Common issues and troubleshooting steps when the drying cabinet fails to operate.
Actions to take when the display indicates a full water tank or pump issue.
Troubleshooting steps when the display indicates the door is not properly closed.
Procedure for resetting alarms and identifying issues based on error codes.
Reasons and solutions for extended drying cycles, including cleaning and load checks.
Steps to diagnose and resolve issues where clothes are not drying adequately.
Checks and adjustments for door sealing and cabinet leveling to ensure proper closure.
To Next Page
General
