PRO
Quick Start Manual
About this manual
Thanks for choosing Ninebot™ Personal Transportation Robot. This manual relates to the instructions for Ninebot™ Mini series which may help
you to:
● Practice safely starting from scratch, grasp basic operation steps, riding methods of Mini gradually.
● Get familiar with the safe riding methods and the riding techniques that must be followed so as to gain safe and pleasant riding experiences.
● Understand the structures and operation modes of Mini as well as methods for its regular maintenance. Enjoy the Ninebot to the fullest in a
safe manner.
For more information, please visit www.ninebot.com. You can also scan two-dimension code on the cover of this manual, subscribing official
microblog and wechat public account of Ninebot.
Warning!
● Get off Mini and charge it for safety in the case of low power, successive warning and limit speed. If
keeping riding forcibly in low battery, danger may be caused by decline of motor and shorten battery
life.
● If Mini is starting up and in autobalance mode during transportation, power output would be cut off
automatically when tires are hung to protect you; balance mode would be recovered automatically
when placing Mini to the ground. Do not lift the Ninebot by the fender, because your finger may be
clipped between the wheel and the fender or damage fender. Please do as follows:
● Please check before every riding, do not ride if there are any looseness, damage or tire pressure lacking. Use Ninebot App to connect with
Mini and check if mainframe buzzing alarms continuously after starting or ask support staff for help. Do not ride before removal of fault.
● Please be sure the power is off when dismounting battery pack or rinse the mainframe, or you will get electric shock and cause severe
damage, or lead to internal short and fire.
● Understand and comply with local traffic rules. Do not use it in any place that is not allowed access by the laws of the relevant country/
region or by the related management units. Do not ride it on the motorway in any area. It is a very dangerous kind of riding behaviors which
may cause severe injury or even death.
1. Introduction to Mini
Ninebot™ Mini Personal Transportation Robot is a new form of electrical balancing vehicle with intelligence and robot function. The rider
can stand on the robot to operate it by moving his/her body. Ninebot boasts the following features:
1. Being eudipleural, the wheels turn with zero radius, making the robot moving more flexibly. Apply to short-distance transportation, for its
excellent maneuvering characteristic, riding Ninebot is more like walking than driving a vehicle.
2. Having small volume of mainframe, so it has access to most of the places where walking is possible, including paths, sidewalks, corridors,
rooms and lift/elevators.
3. Portable mainframe can be easily placed in trunk or other smaller storing space.
4. During riding, the rider controls the robot with his/her body posture instead of an accelerator or a brake, thus making it comfortable in
riding and sensitive in reaction.
Notice
● Please read and reserve this manual carefully. Do not use product arbitrarily before understanding performance detailedly.
● Respect the pedestrians’ right of using road without scaring them. When you are behind someone, remind him and pass
him by the left side with decelerating speed; and when you are in front of someone, keep at the right side with decelerating
speed.
● Please wear safety helmet (bicycle helmet or roller skating helmet) to avoid severe head injury when falling; Knee, elbow
and wrist protectors are recommended to lower probability of accidents and injury.
● Do not lend Ninebot™ Mini to anyone who cannot control it to avoid damage. Please be responsible for your friends’ safety
before giving Ninebot™ Mini to them; Safe riding instruction video can be found in Ninebot App for your teaching and
watching with your friends.
● Form good riding manner with concentrated attention and without making any prompt accelerating start or any prompt
decelerating braking. Achieve civilized riding without colliding with the persons or objects around.
● Scheduled maintenance is basically unnecessary for your Mini; Please conduct basic check to Mini before every riding. If
finding abnormalities like obvious loose parts, obvious reduced battery life, slowly flat tire or excessive wear, abnormal
sound or malfunction of steering, please stop immediately and call service hotline 400-607-0001 for assistance. Or visit
Ninebot App, consult online support staff.
4. Safe Riding Mini
Apart from an entertainment robot, Ninebot is also a transportation vehicle which may have the risks similar to those of all other commuting
tools. However, if you follow the safe riding instruction in this manual, it may maximize the safety of you yourself and others. By so doing, it will
not cause heavy injury to you even if unrecoverable faults happen to Ninebot or something unexpected happens to your body.
There is one thing you should remember. Once you ride Mini on road or other public occasions, although you ride Ninebot on the road or in a
public occasion in compliance with the Guide for Safe Riding, you may be subject to the risks resulted from improper driving or operation by
other people or of other transportation means. It is just as you may be injured by other transportation means when you are walking or riding a
bike. Like all vehicles, faster speed causes longer brake stopping distance. Emergency brake on smooth earth may lead to wheelslip, losing
balance and even falling. It’s significant to be cautious and keep a reasonable and safe distance with other people and transportation means
during riding. Keep cautious and slow before entering unfamiliar area.
Note: Basic status needs to be checked before every riding, like if there is any loosening, falling or damage. If continuous
abnormal sound or alarms of vehicle occurring during riding, please slow down and get off immediately to check the tire
pressure and if there any obvious loose parts, install Ninebot App with smartphone and check safety status of Mini.
THIS CHAPTER IS VERY IMPORTANT. PLEASE READ CAREFULLY AND UNDERSTAND ALL THE
INSTRUCTIONS. PLEASE STRICTLY COMLY WITH SAFETY REQUIREMENTS FOR RIDERS OF THIS MANUAL IN
COUNTRIES AND AREAS WITHOUT LAWS AND REGULATIONS OF SELF-BALANCING ELECTRIC VEHICLE LIKE
CHINA. WE WILL NOT BE RESPONSIBLE FOR ANY PROPERTY LOSS, CASUALTIES, ACCIDENTS, LEGAL
DISPUTES CAUSED BY VIOLATION OF THE SAFETY INSTRUCTIONS ON CHAPTER.
2. Assemble Mini
2.1
Check of articles in the package
After unpacking,take out foot control and mainframe carefully.
When take out the mainframe, please check whether the articles included in the package are as above, and contact your reseller or call service
hotline 400-607-0001 for assistance immediately in case of absence of any.
You can assemble your new Ninebot by the following steps after confirming that all the parts are complete and in good condition.
Open foor-control quick release Quick release links mainframe Fasten quick release
MainframeFoot control
Extended air tap
Charger
Instruction/Warranty Sheet
Height setting knob
Charger port
Riding lamp
Tire air tap
Screen
Foot-control mat
Lock hole
Pull bar
Foot-control bar
Fender
Remember to switch off the power of Mini and unplug the charging cable before handling and
mounting of any accessory or cleaning of the mainframe.
Safety lock Quick charger
Mini 240 Mini 320
Rim blade（detachable）
Protect the steering bar and mainframe from scratches with soft cloth and polyfoam when laying the
mainframe flatwise.Then check whether your Ninebot can be switched on/off(you will hear a sequence of sound)
and whether the dashboard on the upper side of the operation bar can be lighted up.
1.1 Model of Ninebot Mini Series
1.2 Ninebot Mini Sketch
Ninebot™ and the shape icon are the registered trademark of Ninebot (Beijing) Technology Co., Ltd. (Ninebot Inc.); iPhone,
iOS, that of Apple Inc. Android, that of Google Inc. . The owners shall reserve all the rights of their trademarks referred to in
this manual, and Ninebot Inc. shall reserve all the rights of Ninebot™ and the shape icon.
Ninebot Inc. is the owner of various patents relating to Ninebot personal transportation robot, and some other patents
pending. This manual is prepared by Ninebot Inc. who shall reserve all its copyrights. No institute or individual shall copy or
disseminate this manual as a whole or in part, or take use of the aforesaid patents without the consent of Ninebot Inc. in
writing.
We have tried as much as possible to include the description and instruction for all the functions of Ninebot at the time of
printing, but there may still be discrepancies with the Ninebot that you have bought because of improvement and change in
design of functions. Please use IOS or Android device, like smartphone or pad to scan two-dimension code of this page, visit
www.ninebot.com and enter “support & service” channel to download and check the latest electronic user manual for Ninebot.
Or scan another two-dimension code and download Ninebot App using on ISO or Android system, read latest electronic
version of manual. Please note that there are various Ninebot models with different functions, and some of the functions
mentioned herein may not be achieved by your Ninebot. Ninebot Inc. shall reserve the right to explain any deviation of the
actual products from those described in the manual in terms of color and appearance.
纳恩博公司
Ninebot Inc.
快速使用指南
Quick start manual
手册版本号：V1.1.1
3. Accessory(Purchase on selection)
Rotate height setting knob anticlockwise
Lift foot control to needed height
Tighten up height setting knob clockwise
Pull bar can be lifted if needed
2.3 Height setting of foot control
Ninebot Inc.
Version：V1.1.1
Scan and Download
Hint:
Factory default of Mini is nonactivated status. It can only keep
anterior-posterior balance and cannot steer. Please download Ninebot App
and activate Mini directing by instructions and activate steering function by
watching safe riding instruction video. The first 2km of Mini shall keep
beginner mode after activation, rate-limiting is 7km/h and steering sensitivity
is low. After accumulating mileage reaching 2km, App can be used for
switching to normal mode.
保修手册
产品序列号标签粘贴处
本产品经质检合格，准予出厂。
此保修卡（制造商盖章、粘贴序列
号标签后有效），或正规销售发票
均是享受售后服务的凭证，并且请
妥善保管本卡，以此作为全球联保
凭据。保修政策及方式以本手册
“有限保修条款”部分说明为准。
合格证
质检签章
纳恩博公司
Ninebot Inc.
手册版本号：V1.1.1
序列号
粘贴处
After taking out foot control and mainframe, please assemble as follows：
2.2 Assemble Mainframe
Wheel
Foot-control
quick release
Foot rest
To Next Page
Need help?
General
