17Vsett display operation and porgramming
3.1 Speed display area
Unit： MPH, KM/H
The speed signal is taken from the Hall signal inside the motor.Sent to controller by controller(Time of single Hall period,unit:1MS).The display
calculate the true speed based on wheel diameter and signal data calculate the true speed(The motor Holzer also needs to set the number of magnetic
steel)
3.2 Vehicle power gear adjustment， 0-3 digital display;
3.3 vehicle status display area
Zero start and non-zero start prompt
Constant speed cruise hint;
The headlight turns on the prompt;
Communication fault prompt;
Vsett display operation and porgramming
To Next Page
Loading...
