23Vsett display operation and porgramming
While power is on, Long-press(press and hold for 2s) and hold Front Light button to turn on or off headlight.
Power On/Off
Speed Control
Headlight
Mileage & Other data
Turbo / NOz Button
Long-press the power button [7] for 2 seconds to turn on/off the scooter. then use NFC card to active it The scooter
turns off automatically if not used for 90 seconds
While stationary, and with the power on, Long-press(press and hold for 2s) the [5] & [6] button to cycle through the
three different speed levels 1 to 3.Use the throttle to control the speed within each speed level.
While stationary, and with the power on, Long-press(press and hold for 2s) and release th [7] button to cycle through
the following data: ODO (lifetime mileage),TRIP mileage, VOLTAGE level, ELECTRICAL CURRENT level and
ERROR CODE.
While at maximum speed, ong-press(press and hold for 2s) the Turbo / NOz (11) button to get a short boost while
riding
Vsett display operation and porgramming
Text
To Next Page
Loading...
