EXPRESS CHOP
®
QUICK ASSEMBLY
ASSEMBLING & HANDLING THE CHOPPING BLADE ASSEMBLY
QUESTIONS? We’re here to help. Call 1-877-646-5288 or visit ninjakitchen.com
Please make sure to read the enclosed Ninja Owner’s Guide prior to using your unit.
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents of the bowl,
make sure to carefully remove Splash Guard lid and Chopping Blade Assembly, holding the blade assembly by the
shaft. Failure to do so will result in a risk of laceration. Refer to the Ninja Owner’s Guide for additional information.
2.
Set the Splash Guard on
the 16 oz. Processing Bowl,
with the flap open.
3.
Set the Power Pod on top
of the Splash Guard. When
pulsing, hold onto the the
16 oz. Processing Bowl with
one hand and the Power Pod
with the other to keep them
in place. The Pod is powerful!
NJ100
Shaft
Open Flap
4.
Hold the Processing Bowl
firmly while pressing the
on/off pulse button.
NOTE: DO NOT operate
the appliance continuously
for more than 15 seconds
at a time. Be careful not
to over-process. For coarsely
chopped foods, use repeated
short pulsing action until
the desired consistency
is reached.
1.
Holding the Chopping Blade
Assembly by the top of the shaft,
insert it into the 16 oz. Processing
Bowl, making sure it is locked in
place on the pin at the bottom
of the container.
To Previous Page
Loading...
Need help?
General
