20
7 Remove the Pro Extractor
Blades
®
Assembly by
twisting the cap counter-
clockwise. Do not store
blended contents with Pro
Extractor Blades Assembly
attached. Exercise care
when handling the blade
assembly, as the blades
are sharp.
8 Unplug the unit when
finished. To release the
motor base, place your
hands underneath both
sides of the motor base
and gently pull the unit up
and towards you. Refer
to page 29 for storing
instructions.
9 To enjoy your drink on
the go, place the Spout
Lid onto the High-Speed
Blender Cup and twist
lid clockwise until firmly
sealed. For storing
ingredients in the cup, use
only the Spout Lid to cover.
USING YOUR HIGH-SPEED
BLENDER CUP - CONT.
To Next Page
Loading...
Need help?
General
