Questions? 1-855-427-5130 54
SETTING UP YOUR NINJA THIRSTI
™
CUSTOMIZE YOUR BEVERAGE ON THE NEXT PAGE
2. DOCK WATER RESERVOIR
Fill the water reservoir with ice
to the 18oz line. Completely fill
with cold filtered water.
Place filled water
reservoir onto dock.
Open the CO
2
Door
(remove instructional insert
if not needed) and pull
out the CO
2
collar.
Install canister into collar by twisting
to the right.
TWIST UNTIL TIGHT.
Remove the tamper seal and plastic
cap from the top of the CO
2
canister.
NOTE: Save the black CO
cap for return.
1. INSTALL CO CANISTER
Open the Flavor Carriage
by pressing down on
the Mixing Chamber.
Flip Flavored Water
Drops upside down.
GENTLY click into place.
Flip Flavor Carriage up
into the closed position.
An error beep will be heard
if the Flavor Carriage is
not fully closed.
4. INSTALL FLAVORED WATER DROPS
Flip cap all the way back to
the open position.
Tear o only the top tamper seal.
Entire cap should be exposed.
3. OPEN ONE OR TWO
FLAVORED WATER DROPS
NOTE: Store Flavored Water Drops in a cool, dark place to further maintain
aroma, color, and taste.
To Next Page
Loading...