EasyManuals Logo

Nintendo Switch Lite Faqs

Nintendo Switch Lite
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Additional Information:
The Nintendo Switch console takes approximately 3 hours to fully charge when the console is
powered off or in sleep mode. Charging time will be longer if the console is in use.
When fully charged, the battery duration for the console can last approximately 3 hours. This
will vary depending on the software application and functions being used.
What to Do:
1. Power off the console and reset the AC adapter by unplugging it from both ends. Leave
the AC adapter unplugged for at least 30 seconds.
o While it is unplugged, verify that the original Nintendo Switch AC adapter is
being used (model No. HAC-002).
If a different power source is being used, or if the original AC adapter is
damaged, replacing it with the official Nintendo accessory may resolve the
problem.
2. Connect the original AC adapter to the console and then directly to a wall outlet.
o When the AC adapter is first plugged into the console, the LCD screen will power
on and the battery charging indicator will be displayed on the upper right corner
of the screen.
If the battery charge on the console is almost depleted when the AC
adapter is first plugged in, the screen will remain off and a charging
indicator will be momentarily displayed on the top left corner of the LCD
screen. Allow the console to charge for at least 15 to 30 minutes, then
press the POWER Button to boot it up.
Situation Not Resolved:
If the battery charge does not last very long once the AC adapter is removed, then there could
still be an issue with the console or with the AC adapter. If possible, test the console using a
second Nintendo Switch AC adapter.
If the console battery charges correctly while using another AC adapter, then the original
Nintendo Switch AC adapter will need to be replaced. Please contact Nintendo Customer Service
for further assistance.
If the console will still not hold a charge even while using a different AC adapter, or if another
AC adapter is unavailable, the Nintendo Switch console will need to be repaired. For testing
purposes, please include the original AC adapter. Please contact Nintendo Customer Service for

Other manuals for Nintendo Switch Lite

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nintendo Switch Lite and is the answer not in the manual?

Nintendo Switch Lite Specifications

General IconGeneral
PlatformNintendo Switch
AccelerometerYes
Processor frequency768 MHz
Headphone outputs1
USB connector typeUSB Type-C
Headphone connectivity3.5 mm
Built-in cameraNo
Number of built-in speakers2
Product colorGray
Volume controlButtons
Gaming control technologyAnalogue / Digital
Gaming control function buttonsD-pad
Charging time3 h
Battery capacity3750 mAh
Battery life (max)- h
Aspect ratio16:9
Display diagonal5.5 \
Touchscreen typeCapacitive
Display resolution1280 x 720 pixels
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Built-in memory capacity32 GB
Maximum memory card size2000 GB
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version4.1
Weight and Dimensions IconWeight and Dimensions
Depth13.9 mm
Width208 mm
Height91.1 mm
Weight275 g

Related product manuals