EasyManuals Logo

Nippa WB18 User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
In addition to the wall clearances, the floor
must also be given special consideration. The
heater must be placed on a noncombustible
floor system of at least the size specified in
Figure 4. The noncombustible floor may be a
typical concrete basement floor at least four
(4) inches thick.
For Models with the Extension
Follow the clearances and
NONCOMBUSTIBLE wall requirements as
shown in “Safe Wood Stove Installation with
6", 8" or 12" Extension”. This will apply to
10” Extensions as well.
Page 4
SAUNA VENTILATION
With the heater being installed in a
closed area, like a sauna, you must
provide for enough fresh air to assure
proper combustion. Install two (2) 6” x
9” grilles in the sauna. One near the
heater and one near the ceiling
opposite the heater. This will provide
enough air to ventilate the sauna and
supply the heater.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nippa WB18 and is the answer not in the manual?

Nippa WB18 Specifications

General IconGeneral
BrandNippa
ModelWB18
CategoryHeater
LanguageEnglish