The manual-lock free-running hubs are de-
signed to allow you to engage or disengage
the front drive shaft to the front wheels.
Before driving, set the free-running hub to
the desired position:
● 2-wheel operation — Turn the knob to
the FREE position.
● 4-wheel operation — Turn the knob to
the LOCK position.
Be certain to align the S mark on the knob
with the ● mark on the wheel hub.
CAUTION
● Never drive in 4-wheel drive (4H or
4L) with the free-running hubs in the
FREE position.
● Do not drive your vehicle with the
left and right free-running hub set to
different positions.
● For the first 300 miles (483 km) it is
recommended that you drive in the
2H position with the free-running
hubs set in the LOCK position.
● To ensure proper lubrication of front
drive components, drive in the LOCK
position for at least 10 miles (16 km)
each month.
SD0022
MANUAL-LOCK
FREE-RUNNING HUBS
4-19
ZX
To Next Page
Loading...