Nissan 1997 Pickup - Removing and replacing

3. Remove the screws holding the headlight
retaining ring and take off the headlight.
4. After removing the headlight from the
headlight housing, remove the wiring
connector from the rear end of the bulb.
Be careful not to disturb the aiming ad-
justment screws.
5. When installing the new unit, be sure that
TOP in raised letters on the lens is on the
upper side.
● Use the same number and wattage as
originally installed:
Halogen light
Wattage 65/35
Bulb No. H6059
Incandescent light
Wattage 65/55
Bulb No. 6052
● When aiming adjustment is neces-
sary, contact your NISSAN dealer.
DI0075 ADI0732
7-22
ZX