The instrument brightness control operates
when the light switch is in the
or
position.
Turn the control to adjust the brightness of
the instrument panel lights.
Push the switch on to warn other drivers
when you must stop or park under emer-
gency conditions. All turn signal lights flash.
WARNING
● When stalled or stopped on the road-
way under emergency conditions,
move the vehicle well off the road.
● Do not use the hazard warning flash-
ers while moving on the highway
unless unusual circumstances force
you to drive so slowly that your ve-
hicle might become a hazard to other
traffic.
● Turn signals do not work when the
hazard warning flasher lights are on.
The hazard warning flashers can be actu-
ated with the ignition switch in any position.
Some state laws may prohibit the use of
the hazard warning flasher switch while
driving.
SIC0052 SIC0050
INSTRUMENT BRIGHTNESS
CONTROL
HAZARD WARNING FLASHER
SWITCH
1-12
ZX
To Next Page
Loading...