Nissan 2010 Cube User Manual

Details the dedication of NISSAN and dealers to customer satisfaction and service needs.

Information on proper seating, upright posture, and seatback reclining for safety.

Instructions for adjusting, removing, and installing head restraints for proper protection.

Precautions on seat belt usage, proper adjustment, and wearing for maximum protection.

Guidelines and precautions for using appropriate child restraints for infants and children.

Precautions and installation guidelines for using booster seats for children.

Information on supplemental restraint systems like airbags and pretensioners.

Overview of the vehicle's cockpit controls, including steering wheel and shifter.

Identification and location of various controls and indicators on the instrument panel.

Explanation of the tachometer, speedometer, fuel gauge, and other instrument panel indicators.

Details on various warning lights and audible reminders and their meanings.

Information on the vehicle's security systems, including immobilizer and alarm functions.

Information on master keys, key number plates, and NISSAN Vehicle Immobilizer System keys.

Instructions on locking and unlocking doors using keys, inside lock knobs, and power locks.

How to use the keyfob for locking/unlocking doors, panic alarm, and setting modes.

Procedures for opening and closing the vehicle's hood, including safety warnings.

Instructions for opening and closing the back door, with safety and caution notes.

Important safety precautions related to the rearview monitor and camera operation.

How to use the rearview monitor, including reading guide lines and adjusting the screen.

Instructions on operating center and side ventilators for airflow direction.

Operation of the manual air conditioner, including controls for fan, mode, and temperature.

Precautions for radio operation, reception, and using the audio system.

General safety precautions for starting the engine and driving, including exhaust gas and catalyst warnings.

Information about the TPMS, low tire pressure warnings, and malfunction indicators.

Defensive driving techniques, obeying traffic laws, and avoiding hazardous driving practices.

Explanation of the ignition switch positions and operation for vehicles without Intelligent Key.

Operation of the push-button ignition switch for vehicles with Intelligent Key system.

Recommended procedures for operating the Continuously Variable Transmission (CVT) and starting the vehicle.

Steps for changing a flat tire, including stopping the vehicle and using jacking tools.

Location and usage of tools for jacking up the vehicle and removing the damaged tire.

Instructions and precautions for jump starting the vehicle's engine with a booster battery.

Steps to take if the vehicle is overheating, including safety warnings about the radiator cap.

Guidelines and precautions for towing the vehicle, including recommended methods and safety chains.

Procedures for washing, waxing, and removing spots from the vehicle's exterior paint.

How to wash the vehicle using a sponge and mild soap solution, with cautions.

Benefits of regular waxing for paint protection and vehicle appearance.

Methods for cleaning interior trim, plastic parts, seats, and removing dust.

Proper use and positioning of floor mats to avoid pedal interference and ensure safety.

Factors contributing to vehicle corrosion and methods to protect the vehicle from rust.

Importance of performing scheduled and general maintenance for NISSAN vehicles.

Daily checks and procedures essential for proper vehicle operation and detecting issues.

General safety precautions to prevent injury and damage during inspection or maintenance.

Identification of key check points within the engine compartment for the MR18DE engine.

Information on the engine cooling system, including coolant level checks and warnings.

Procedures for checking and changing engine oil and filter, with cautions.

Battery maintenance, cleaning, terminal checks, and safety warnings related to hydrogen gas.

Information on spark plugs, including iridium-tipped types and replacement precautions.

How to remove and replace the air cleaner filter, with safety warnings.

Details on brake system operation, self-adjusting brakes, and brake pad wear warnings.

Procedures for checking and replacing fuses in the engine compartment and passenger compartment.

Step-by-step guide to replacing the battery in the keyfob and Intelligent Key.

Table of approximate fluid capacities and recommended specifications for engine oil, coolant, etc.

Guidelines on using unleaded regular gasoline with the correct octane rating and precautions.

Guidance on selecting the correct engine oil grade, quality, viscosity, and oil filter.

Technical specifications for the engine, wheels, tires, and dimensions.

Information on vehicle identification numbers (VIN), engine serial number, and certification labels.

Location and purpose of the emission control information label under the hood.

Location of the tire pressure and load capacity information label on the vehicle.

Step-by-step instructions for mounting the front license plate, except for Kro¯m models.

Understanding terms like GVWR, GAWR, and vehicle capacity weight for safe loading.