SDI2451
INTELLIGENT KEY
Replace the battery in the Intelligent Key as
follows:
1. Remove the mechanical key from the In-
telligent Key.
2. Insert a small screwdriver into the slit of the
corner and twist it to separate the upper part
from the lower part. Use a cloth to protect
the casing.
3. Replace the battery with a new one.
Recommended battery:
CR2025 or equivalent
.
Do not touch the internal circuit and
electric terminals as doing so could
cause a malfunction.
.
Hold the battery by the edges. Holding
the battery across the contact points will
seriously deplete the storage capacity.
.
Make sure that the + side faces the
bottom of the case.
SDI2452
4. Align the tips of the upper and lower parts
*
1
, and then push them together
*
2
until it
is securely closed.
5. Operate the buttons to check its operation.
See a NISSAN dealer if you need any assistance
for replacement.
FCC Notice:
For USA:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference that
Maintenance and do-it-yourself 8-25
To Next Page
Loading...