SDI2503
Tire and Loading Information label
*
1
Seating capacity: The maximum num-
ber of occupants that can be seated in
the vehicle.
*
2
Vehicle load limit: See “Vehicle load-
ing information” (P.9-12).
*
3
Original size: The size of the tires
originally installed on the vehicle at the
factory.
*
4
Cold tire pressure: Inflate the tires to
this pressure when the tires are cold.
Tires are considered COLD after the
vehicle has been parked for 3 or more
hours, or driven less than 1 mile (1.6
km) at moderate speeds. The recom-
mended cold tire inflation is set by the
manufacturer to provide the best
balance of tire wear, vehicle handling,
driveability, tire noise, etc., up to the
vehicle’s GVWR.
*
5
Tire size — see “Tire labeling” (P.8-
33).
*
6
Spare tire size or compact spare tire
size (if so equipped)
Maintenance and do-it-yourself 8-31
To Next Page
Loading...