FOLDING REAR SEAT
1. Ensure the rear outboard seat belt tongue is
properly stowed in the rear trim slot next to
the door
䊊
1
before moving the rear seatback
䊊
2
in order to prevent the outboard seat belt
from getting caught behind the rear seat-
back.
2. Pull the knob
䊊
A
and fold the seatback
down.
WARNING
● Never allow anyone to ride in the cargo
area or on the rear seat when it is in the
fold-down position. Use of these areas
by passengers without proper restraints
could result in serious injury in an acci-
dent or sudden stop.
● Properly secure all cargo with ropes or
straps to help prevent it from sliding or
shifting. Do not place cargo higher than
the seatbacks. In a sudden stop or col-
lision, unsecured cargo could cause
personal injury.
● When returning the seatbacks to the
upright position, be certain they are
completely secured in the latched posi-
tion. If they are not completely secured,
passengers may be injured in an acci-
dent or sudden stop.
LRS8103 LRS2244
1-4 Safety—Seats, seat belts and supplemental restraint system
To Next Page
Loading...
