READY CHARGE FAULT Status and action to be taken
䡩䡩䡩Every time the EVSE plug is connected to an outlet, all indicator lights illuminate for 0.5 seconds.
䡩 쏹쏹
After initial processing is completed, when the EVSE is not connected to the vehicle, or the EVSE is con-
nected to the vehicle but charging is not being performed.
䡩䡩쏹 While the battery is being charged
嘷
䡩
쏹쏹
When the ground cable is disconnected
Check the grounding of the outlet being used. If the grounding is normal, contact a NISSAN certified LEAF
dealer.
嘷
䡩
䡩
쏹
or
嘷
䡩
嘷
䡩
When the temperature of the electrical plug is too hot, or the EVSE is unable to detect the temperature of the
electrical plug, check that the electrical plug is connected correctly. If it is connected normally, stop use im-
mediately and contact a NISSAN certified LEAF dealer.
䡩 쏹
嘷
䡩
When an electric leakage occurs or the EVSE malfunctions
Stop use immediately and contact a NISSAN certified LEAF dealer.
䡩 쏹 䡩
When the EVSE malfunctions
Stop use immediately and contact a NISSAN certified LEAF dealer.
쏹쏹쏹
If the EVSE control box indicator light does not illuminate after connecting the plug to the outlet, check the
GFCI and circuit breaker for the outlet. If either the GFCI or breaker has tripped, the circuit may not be suit-
able for use with EVSE. You should have a licensed electrician inspect and repair the electrical circuit. If the
GFCI breaker is not tripped, stop using the EVSE and contact a NISSAN certified LEAF dealer.
Meaning Light ON Flashing Light OFF
Symbol 䡩嘷
䡩
쏹
Charging CH-31
To Next Page
Loading...
