3. Move the load floor along the lower trim
panel channels toward the front of the ve-
hicle until the latches lock it into place.
4. Lift and close the panel.
To raise:
1. Lift and open the panel
2. Move the load floor along the lower trim
panel channels toward the rear of the vehicle
until it reaches the end of the slot.
3. Move the load floor along the upper trim
panel channels toward the front of the ve-
hicle until the latches lock it into place.
4. Lift and close the panel.
LUGGAGE HOOKS
The luggage hooks can be used to secure cargo
with ropes or other types of straps.
CAUTION
Do not apply a total load of more than
6.6 lbs (3 kg) to a single luggage hook.
LIC2528 LIC3185
Instruments and controls 2-37
To Next Page
Loading...