7. Reinstall the tire basket by pushing upward
on the basket
䊊
5
and inserting the hook
䊊
6
.
Please be sure that the hook is located as
shown in the image
䊊
7
. The hook must
engage from the inside of the basket.
8. Tighten the bolt
䊊
8
clockwise until the bolt is
tight using the wheel nut wrench and
wrench extension to move the tire basket up
to the holding position.
WARNING
● Always make sure that the spare tire,
tire basket and jacking equipment are
properly secured after use. Such items
can become dangerous projectiles in an
accident or sudden stop.
LCE2099 LCE2100 LCE2101
6-10 In case of emergency
To Next Page
Loading...