Nissan ENGINE - Engine Preparation and Special Tools; Special Service Tool

EM-6
< PREPARATION >
[VQ40DE]
PREPARATION
PREPARATION
PREPARATION
Special Service Tool INFOID:0000000008798947
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number
(Kent-Moore No.)
Tool name
Description
ST0501S000
(—)
Engine stand assembly
1. ST05011000
(—)
Engine stand
2. ST05012000
(—)
Base
Disassembling and assembling engine
16441 6N210
(J-45488)
Quick connector release
Removing fuel tube quick connectors in en-
gine room.
KV10111100
(J-37228)
Seal cutter
Removing oil pan (lower and upper), front and
rear timing chain case, etc.
WS39930000
(—)
Tube presser
Pressing the tube of liquid gasket
KV991J0050
(J-44626)
Air fuel sensor Socket
Loosening or tightening air fuel ratio A/F sen-
sor
a: 22 mm (0.87 in)
KV10114400
(J-38365)
Heated oxygen sensor wrench
Loosening or tightening heated oxygen sen-
sor 1
a: 22 mm (0.87 in)
NT042
PBIC0198E
NT046
NT052
LBIA0444E
NT636
Revision: January 2013 2013 Xterra